Konica Minolta bizhub C650 Service Manual page 312

Field Service Ver. 8.0 Jun. 2008
[2] [4]
[1]
[3]
[1]
[3]
A00JF2C414DA
[5]
[4]
[2]
A00JF2C415DA
18. Remove the E-ring [1] and slide the
drive pulley [2] in the arrow-marked
direction to remove the wire /4
(white) [4] from the shaft [3].
19. Remove the E-ring [1].
20. Remove the pulley [2] and the wire
restraining cover [3], and then
remove the wire /4 (white) [4].
21. Pull out and remove the wire /4
(white) toward the rear side of the lift
plate [5].
22. To reinstall, reverse the order of
removal.
NOTE
• The same front/rear wires are used
for both white and black.
6. Other
259