K Developing Motor (M19); Tray1 Lift-Up Motor (M6) - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008
6.3.81

K developing motor (M19)

1. Remove the fan motor assy /2.
See the steps 1 to 5 of K PC drum motor removing procedure.
See P.216
[1]
[2]
6.3.82

Tray1 lift-up motor (M6)

1. Remove the tray1/2.
See P.121
[3]
[4]
[4]
[3]
A00JF2C308DA
[2]
[3]
[1]
A00JF2C310DA
[1]
[3] [2]
A00JF2C311DA
2. Remove four screws [1] and the con-
nector [2], and remove the K devel-
oping motor [3].
2. Disconnect the connector [1] and
remove the harness from the edge
cover [2].
3. Remove two screws [3], take out the
tray1 lift-up motor assy [4] and turn it
around.
4. Disconnect five connectors [1].
5. Remove the harness from the edge
cover [2] and three wire saddles [3],
and remove the tray1 lift-up motor
assy [4].
6. Other
217