Centering (Duplex 2Nd Side) - Konica Minolta bizhub C451 User Manual

Utility mode

Centering (Duplex 2nd Side)

The starting print position at the left edge of the paper for the second side
during automatic double-sided copying for each paper tray can be adjusted.
0 The starting print position is adjusted during manufacturing of the
machine. Normally, the starting print position will not need to be
adjusted.
0 Only A4 v paper can be used to adjust the bypass tray.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-56.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [4 Centering (Duplex 2nd Side)].
The Centering (Duplex 2nd Side) screen appears.
6
Touch the button for the paper tray to be set.
7
Press the [Start] key.
A test pattern is printed.
C451
11
11-68