Restore The Rack Enclosure; Power On The System - Sun Microsystems Fire 280R Setup And Rackmounting Manual

Hide thumbs Also See for Fire 280R:

Table of Contents

Restore the Rack Enclosure

See the instructions provided with your rack enclosure to complete these steps.

1. Route and manage the AC cable and other cables within the rack enclosure.

2. Retract the enclosure's anti-tip legs, if applicable.

3. Replace the side panels, if applicable.

4. Replace the front and back doors, if applicable.

You need the system key to perform this procedure.

Caution – Never move the system when the system power is on. Movement can

cause catastrophic disk drive failure. Always power off the system before moving it.

Caution – Before you power on the system, make sure that the cover is properly

installed.

1. Turn on power to any peripheral and external storage devices.

2. Turn on power to the monitor or terminal, if applicable.

Sun Fire 280R Server Setup and Rackmounting Guide • January 2001

Table of Contents

Do you have a question about the Fire 280R and is the answer not in the manual?