System power supply
The Sun N2000 Series system includes two 600W power supplies. Each power
supply uses a separate power cord that you connect to the power source. If a failure
occurs in the redundant power configuration, the N2000 Series sends an event
message to the system log file to notify you that one of the power supplies is out of
service.
To protect the equipment, use a conditioned power source or uninterruptible power
supply (UPS). The power source must provide a reliable Earth ground, and provide
the following:
Voltage: 115 or 230 VAC (90–135 or 180–265 VAC), 60 Hz (47–63 Hz); automatic
■
selection
Current: 10A @ 115 VAC, 5A @ 230 VAC
■
The power supply connector uses a standard 3-prong keyed IEC receptacle. The
power cord is supplied with an IEC connector on one end, NEMA 5-15 plug (U.S.
domestic) on the other end.
Chapter 1 N2000 Series overview
5