Adjustment Of The Paper Feeding System - Toshiba e-STUDIO230L Service Handbook

3.8

Adjustment of the Paper Feeding System

3.8.1 Sheet sideways deviation caused by paper feeding
<Procedure>
The center of the printed image shifts to the front
side. Move the guide to the front side (Arrow
(A) direction in the lower figure).
Feeding direction
Fig. 3-40
Bypass feeding
1) Loosen the screen.
2) Move the entire guide to the front or rear side.
3) Tighten the screw.
(A)
Fig. 3-42
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
[Rear]
Center
[Front]
(B)
3 - 49
05/07
The center of the printed image shifts to the rear
side. Move the guide to the rear side (Arrow
(B) direction in the lower figure).
[Rear]
Feeding direction
[Front]
Fig. 3-41
Drawer feeding
1) Loosen 2 screws.
2) Move the entire guide to the front or rear side.
3) Tighten the screws.
( B )
( A )
Fig. 3-43
e-STUDIO200L/202L/203L/230/232/233/280/282/283
3
Center
ADJUSTMENT