Set Powerinline External Power; Set Ppp Authentication Incoming - Avaya P330 Reference Manual

set powerinline external power

User level: privileged, supervisor.
This command is available on P333T-PWR switches only.
Use the set powerinline external power command to set the maximum
power available from the external power supply to power DTEs.
The syntax for this command is:
set powerinline external power <module_number> <power>
module_number
power
Example:
P330-N# set powerinline external 2 200
external power set to 200Watts

set ppp authentication incoming

User level: privileged, supervisor.
Use the set ppp authentication command to define the authentication
method used for a PPP server or client session.
The syntax for this command is:
set ppp authentication incoming {pap|chap|none}
pap
chap
none
Example:
P330-N# set ppp authentication incoming chap
PPP requires CHAP authentication for incoming sessions.
Avaya P330 Reference Guide
Chapter 2
Number of the module for which external power is to be
allocated
Value of the maximum power allocated to powering DTEs
in Watts.
PAP authentication method
CHAP authentication method
No authentication
Avaya P330 Layer 2 CLI Commands
81