Ip Broadcast-Address; Ip Directed-Broadcast - Avaya P330 Reference Manual

Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface "marketing":
Router-N(configure-if:marketing) # ip bootp-dhcp server
192.168.37.46
Done!

ip broadcast-address

User level: privileged, supervisor.
Use the ip broadcast command to update the interface broadcast address. The
Broadcast address must be filled in with 0s (zeros) or 1s (ones).
The syntax for this command is:
ip broadcast-address <bc addr>
bc addr
Example:
Router-N(config-if:marketing)#ip broadcast address
192.168.255.255

ip directed-broadcast

User level: privileged, supervisor.
Use the ip directed-broadcast command to enable net-directed broadcast
forwarding.
Use the no ip directed-broadcast command to disables net-directed
broadcasts on an interface.
The syntax for this command is:
[no] ip directed-broadcast
Example:
Router-N(config-if:marketing)# ip directed broadcast
Avaya P330 Reference Guide
Chapter 3 Avaya P330 Layer 3 CLI Commands
The broadcast IP address
239