Set Allowed Managers; Set Allowed Managers Ip - Avaya P330 Reference Manual

Example:
P330-1# session 2
P330-2# session
P333T (*) In Slot 1
P334T
P330-2#

set allowed managers

User level: privileged, supervisor.
Use the set allowed managers command to enables or disable the Allowed
Managers feature.
When this feature is enabled, only those stations whose IP addresses are listed in the
Allowed Managers table can access the device over Telnet, SNMP, or HTTP.
The syntax for this command is:
set allowed managers [enabled|disabled]
Example:
P330-1(super)# set allowed managers enabled
Managers are enabled

set allowed managers ip

User level: privileged, supervisor.
Use the set allowed manager ip command to add or remove an IP address
from the Allowed Managers table. The Allowed Managers table can contain up to
twenty IP addresses.
The syntax for this command is:
set allowed managers ip [add | delete][IP address]
add
delete
IP address
Avaya P330 Reference Guide
In Slot 2
Adds specified IP address to the Allowed Managers
table
Deletes specified IP address from the Allowed
Managers table
IP address to be added or removed
Chapter 2 Avaya P330 Layer 2 CLI Commands
41