Show Powerinline Image Version - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
2/1

show powerinline image version

User level: user, privileged, supervisor
This command applies to P33T-PWR switches only.
Use the show powerinline image version command to display the current
image version of P333T-PWR switches in the stack or a specific switch.
The syntax of this command is:
show powerinline image version [<module-number>]
If you do not specify a number, then the software version for all the P333T-PWR
switches is shown.
module-
number
Example:
P330-2> show powerinline image version
Mod
---
1
4
5
Example:
P330-2> show powerinline 3
Mod
---
3
140
off
Number of the module for which you want to display the
current powerline image version
Image Version
-------------
1.2.9
1.2.9
1.2.9
Image Version
-------------
1.2.9
0 Low
Avaya P330 Reference Guide