set radius authentication retry-number
User level: supervisor
Sets the number of times an access request is sent when there is no response.
The syntax for this command is:
set radius authentication retry-number <number>
number
Example:
P330-1(super)# set radius authentication retry-number 3
set radius authentication retry-time
User level: supervisor
Sets the time to wait before re-sending an access request.
The syntax for this command is:
set radius authentication retry-time <time>
time
Example:
P330-1(super)# set radius authentication retry-time 5
set radius authentication secret
User level: supervisor
Use the set radius authentication secret command to enable secret
authentication for the P330 unit.
The syntax for this command is:
set radius authentication secret <string>
string
Example:
P330-1(super)# set radius authentication secret hush
Avaya P330 Reference Guide
Number of retries
Retry time in seconds
text password
Chapter 2
Avaya P330 Layer 2 CLI Commands
85