Set Intermodule Port Redundancy - Avaya P330 Reference Manual

set interface ppp {enable|enable-always|disable|off|reset}
enable
enable-always
disable
off
reset
Example:
P330-N# set interface ppp reset
PPP has reset the connected modem.
Example:
P330-N# set interface ppp enable
Entering the Modem mode within 60 seconds...
Please check that the proprietary modem cable is plugged
into the console port
Example:
P330-N# set interface ppp disable
Entering the Terminal mode immediately

set intermodule port redundancy

User level: privileged, supervisor.
Use the set intermodule port redundancy command to define the stack's
unique intermodule redundancy scheme. The defined scheme can be cleared using
the set intermodule port redundancy off command.
You must disable Spanning Tree before you can enable intermodule port
redundancy.
The syntax for this command is:
set intermodule port redundancy <module/prim-port> <module/
second-port> {on [<name>]}
module/prim-port
Avaya P330 Reference Guide
Chapter 2
Enable PPP and enter modem mode.
Enter modem mode every time that the proprietary modem
cable is plugged into the console port.
Disable PPP and enter terminal mode
Disconnect the active PPP session.
Reset the connected modem.
Primary port number
Avaya P330 Layer 2 CLI Commands
53