Advertise External Route - Avaya 5000 Series Troubleshooting Manual

Troubleshooting layer 2 and layer 3
2. At the command prompt, enter the show ecmp command to display the new ECMP

Advertise external route

You must ensure that the external route is advertised by the Autonomous System Border
Router (ASBR) as Link-State Advertisement (LSA) type-5 or type-7.
Task flow: Advertise external route
You can use the following task flow to help ensure that the external route is advertised.
Figure 84: Advertise external route
Showing IP OSPF redistribute
About this task
Use this procedure to display the routing table information.
You can set ECMP to allow multiple routes on both ERS 5520 and ERS /5530.
178 Troubleshooting
settings.
Comments? infodev@avaya.com
December 2013