Chapter 2 Avaya P330 Layer 2 Cli Commands; Clear Cam; Clear Dot1X Config - Avaya P330 Reference Manual

Chapter 2
Avaya P330 Layer 2 CLI Commands
This chapter describes all the P330 Layer 2 CLI commands and parameters in
alphabetical order.

clear cam

User level: privileged, supervisor.
Use the clear cam command to delete all entries from the CAM table.
The syntax for this command is:
clear cam
Example:
P330-N# clear cam
CAM table cleared.

clear dot1x config

User level: privileged, supervisor.
Use the clear dot1x config command to disable dot1x on all ports and return
values to the default settings..
The syntax for this command is:
clear dot1x config
Example:
P330-N# clear dot1x config
Original Configuration was Restored
Avaya P330 Reference Guide 9