show web aux-files-url
User level: user, privileged, supervisor
Displays the URL/directory from where the switch can access the Device Manager
auxiliary files (for example help files).
The syntax for this command is:
show web aux-files-url
Example:
P330-N>show web aux-files-url
the web aux-files-url is 149.49.36.212/P330test
stack health
User level: privileged, supervisor.
Use the stack health command to test the integrity of stacking modules and
cables.
You can only run this command on a stack.
The stack is reset once the command has been executed.
You should not load the stack with traffic during this test.
Please follow the instruction shown on the CLI screen, during the various stages
of this test.
The syntax for this command is:
stack health
Example:
P330-N>stack health
TThis operation will eventually result in a Stack reset.
- do you want to continue (Y/N)? y
Start testing stack health....
This test will take a few minutes!!
The stack health test was completed successfully
sync time
User level: privileged, supervisor.
Use the sync time command to synchronize the time used by all modules in the
switch.
Avaya P330 Reference Guide
Chapter 2
Avaya P330 Layer 2 CLI Commands
159