Show Device-Mode; Show Dot1X; Show Download Status - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

show device-mode

User level: user, privileged, supervisor
Use the show device-mode command to show the current P330-ML or P333R
operating mode. Possible modes are Router, or Layer 2.
This command is not avaliable to the P333T, P334T, P332MF and P333T-PWR
switches which do not have Router and to P333R-LB which is always in Load-
Balancing mode.
The syntax for this command is:
show device-mode
Example:
P330-N>show device mode
Device mode is router

show dot1x

User level: user, privileged, supervisor
Use the show dot1x command to display the system dot1x capabilities, protocol
version, and timer values.
The syntax for this command is:
show dot1x
Example:
P330-N>show dot1x mode
PAE Capabilities
Protocol Version
system-auth-control
*** Warning : Authentication server
disabled/not-exist and so,
*** no authentication can be made

show download status

User level: user, privileged, supervisor
This command applies the P330-ML switches only.
Use the show download status command to display a summary of the last
software download operation.
106
Authenticator Only
1
disabled
( RADIUS ) is
Avaya P330 Reference Guide