Page 1
Avaya P333T Quick Start Guide Unpack Rack mount (optional) Power up Connect the cables Configure Run Web-based Manager (optional)
Page 2
• Avaya Communication Warranty and License Agreement Avaya P330 Documentation and Utilities CD The CD contains the latest User's Guides for the Avaya P330 stackable switches and files for use with the Embedded Web Manager. User's Guides You can view and print these Guides using Adobe® Acrobat® Reader.
Page 3
Rack mount (optional) WARNING: Disconnect all cables from the unit before proceeding with the rack installation. Snap open the hinged ends of the unit’s front panel to reveal the screw holes. Closed hinged end P333T EXPANSION SLOT Open hinged end P333T...
Page 4
DC terminal block Connect the power cable to the switch at the input terminal block on the rear of the unit. ! The terminals are marked “+”, “-“ and the IEC 5019a Ground symbol. ! The size of the three screws in the terminal block is M3.5.
Connect the other end of the cable to the Ethernet port of the PC, server, router, worksta- tion, switch or hub. ! Use a cross cable when connecting the Avaya P330 to a switch or hub. Check that the appropriate link (LNK) LEDs light up.
Basic configuration To connect a PC terminal or VT-100 terminal to the Avaya P330 If you are using a PC, initiate a VT-100 terminal emulation session using an application such as Windows® HyperTerminal. Press Enter. Type the User name root when prompted and press Enter.
Page 7
If you wish to change the default parameters shown and configure the mandatory parameters, we recommend that you use the Command Line Interface (CLI). ! For further information, please refer to Chapter 6 of the Avaya P330 User’s Guide. Default Switch Parameters...
Page 8
Run the Web-Based Manager (optional) ! To configure the Avaya P330 you can use the P330 Web-based Manager in addition to using the CLI. System Requirements Minimum hardware and Operating System requirements are: • Pentium® II 400 Mhz-based computer with 128 Mb of RAM •...
Page 9
5.Type x:\emweb-aux-files\plugin_1_2_2.exe (where x: is the CD drive letter) 6.Follow the on-screen instructions. • Or install the plug-in from the Avaya site by clicking on the link on the welcome page. • Or, if the network manager has placed the files on the local site, install the plug-in from there by clicking the link on the welcome page.
Contact Information To contact Avaya technical support: From the United States: Please call 1-800-237-0016, press 0, then press 73300. From outside the United States: EMEA (Europe, Middle East and Africa). Email: csctechnical@avaya.com Country Local Dial-In Number Albania +31 70 414 8001...