Chapter 4 Load Balancing Cli Commands; How The Commands Are Organized - Avaya P330 Reference Manual

Chapter 4
Load Balancing CLI Commands
This chapter provides all load balancing CLI commands, parameters and their
default values. Not all groups, parameters and commands are available when P330
boots up from its INIT software.
You can use the load balancing commands available from the Router-N #
prompt. To do this:
1 Log in.
2 Type session router.
All commands must be performed in either configure or super mode, unless
otherwise specified. To enter configure mode, for example, type configure.
To exit a context mode, type exit.
You can use all show commands in user mode.

How the Commands are Organized

The load balancing commands are organized according to command groups.
Table 4.1
Command Group
ar-filter
lb-control
hc
pip
real-ar-server
real-slb-server
real-bridging-fw
real-routing-fw
rsg
set
Avaya P330 Reference Guide
Load Balancing Command Groups
Page
260
262
269
278
280
284
289
293
299
332
259