Show Port Edge State; Show Port Flowcontrol - Avaya P330 Reference Manual

show port edge state

User level: privileged, supervisor.
Use the show port edge state command to show a port's edge admin and
operational RSTP state.
A port can be set to admin state of edge port, but if a BPDU is received on this
port the oper state is changed to non-edge state.
The syntax for this command is:
show port edge state <module/port>
module/
port
Example:
P330-N>show port edge state
Port
-------
1/1
1/2

show port flowcontrol

User level: user, privileged, supervisor
Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [<mod_num>[/<port_num>]]
module
(Optional)
port
(Optional)
Example:
P330-N>show port flowcontrol 3/4
Port
------ ----- ----
3/4
Avaya P330 Reference Guide
Port identifier
admin state
-------------
edge-port
non-edge-port
Number of the switch . If you do not specify a number, all
switches are shown.
Number of the port on the switch. If you do not specify a
number, all ports on the specified switch are shown.
Send-Flowcontrol Receive-Flowcontrol
Admin Oper
off off
Chapter 2 Avaya P330 Layer 2 CLI Commands
oper state
-------------
edge-port
non-edge-port
Admin Oper
----- ----
off off
133