Set Port Dot1X Port-Control; Set Port Dot1X Quiet-Period; Set Port Dot1X Re-Authenticate - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

set port dot1x port-control

Use the set port dot1x port-control command to set the dot1x parameter
per port.
The syntax for this command is:
set port dot1x port-control <module/port> <mode>
module/
port
mode
Example:
P330-1(super)# set port dot1x port-control 2/3 force-
authorize
port 1/2 control was set to force-authorize

set port dot1x quiet-period

Use the set port dot1x quiet-period command to set the 802.1x quiet period
per port.
The syntax for this command is:
set port dot1x quiet-period <module/port> <seconds>
module/
port
seconds
Example:
P330-1(super)# set port dot1x quiet-period 4/2 300

set port dot1x re-authenticate

Use the set port dot1x re-authenticate command to set the port to re-
authenticate.
62
Module and port number (or range of ports)
force-unauthorize - the port is always is blocking state
auto - forwarding/blocking depends on authorization outcome
force-authorize - the port is always in forwarding state
Module and port number (or range of ports)
Number of seconds – 0 to 65535
Avaya P330 Reference Guide