Virtual-Server Virtual-Slb-Service Hc; Virtual-Server Virtual-Slb-Service Id - Avaya P330 Reference Manual

virtual-server virtual-slb-service hc

User level: privileged, supervisor
Use the hc command to set a health check method for the virtual SLB service. Use
the no form of this command to set the health check method for the virtual SLB
service to the default (auto).
The syntax for this command is:
[no] hc <auto | ping | tcp-connect | http | script>
[<specific-id>]
auto
ping
tcp-connect
http
script
specific-id
Example:
Router-N(configure)#

virtual-server virtual-slb-service id

User level: privileged, supervisor
Use the id command to set the identification number for the virtual SLB service.
The syntax for this command is:
id <service-id>
service-id
Example:
Router-N(configure)#
Avaya P330 Reference Guide
Chapter 4
The default, which is the ping health check method.
Each server is periodically pinged and checked if an answer
was received.
A TCP connection is periodically opened to every server,
checking for successful completion of the connection.
Enables verifying HTTP server functioning by comparing
the response from the server with a user-configurable
response.
Verifies the functioning of the server by running a script on
the server.
The identification number of the health check.
hc ping
Identification number for the virtual SLB service, an integer
from 1 to 1024.
id 21
Load Balancing CLI Commands
327