Validate-Group - Avaya P330 Reference Manual

validate-group

User level: privileged, supervisor.
Use the validate-group command to verify that all the rules in a policy list are
valid.
If there is a configuration problem with a specific rule, or with a number of
rules, detailed error messages will be given.
The syntax for this command is:
validate-group <policy-list-number>[quiet]
quiet
Example:
Router-1(configure)# validate-group 101
List 101 is valid
The validation process may take some time to complete.
Avaya P330 Reference Guide
Chapter 3 Avaya P330 Layer 3 CLI Commands
does not display error messages
235