Show Hc; Show Hc Details; Show Hc Last Response - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands
Example:
Router-N(super)# hc tcp-connect 16 80

show hc

User level: user, privileged, supervisor
Use the show hc command to display the Health Check configuration.
The syntax for this command is:
show hc [<hc-type> [<hc-id>]]
hc type
hc id
Example:
Router-N> show hc tcp-connect 1

show hc details

User level: user, privileged, supervisor
Use the show hc details command to show the details of a Health Check.
The syntax for this command is:
show hc details [<hc-type> [<hc-id>]]
hc-type
hc-id
Example:
Router-N> show hc details http 2

show hc last response

User level: user, privileged, supervisor
Use the show hc last response command to show the last data response of a
HTTP or Script Health Check. This assists in verifying the correct offset or contents
of an expected string.
276
The type of Health Check: ping, tcp-connect, http, or string.
The index number of the Health Check, an integer from 1 to 32.
The type of Health Check: ping, tcp-connect, http, or script.
The index number of the Health Check, an integer up to 32.
Avaya P330 Reference Guide