Set Port Level; Set Port Mirror - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
Example:
P330-N# set port flowcontrol receive 5/1 on
Port 5/1 flow control receive administration status set to on

set port level

User level: privileged, supervisor.
Use the set port level command to set the priority level of a port or range of
ports on the switching bus. Packets traveling through a port set at normal priority
should be served only after packets traveling through a port set at high priority are
served.
The syntax for this command is:
set port level <module>/<port> [value]
module
port
value
Example:
P330-N# set port level 3/1 5
Port 3/1 level set to 5

set port mirror

User level: privileged, supervisor.
Use the set port mirror command to define a port mirroring pair in the stack.
The syntax for this command is:
set port mirror source-port <module/port> mirror-port <module/
port> sampling <activate> direction <direction>
module
port
activate
68
Number of the switch.
Number of the port on the module.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
Priority level (0-7)
Number of the switch.
Number of the port on the switch.
always - keyword to activate the port mirroring entry
Avaya P330 Reference Guide