Chapter 4
Load Balancing CLI Commands
Virtual Server Virtual SLB Service Commands
To configure a virtual Server Load Balancing (SLB) service for a virtual server:
1
Use the virtual-server virtual-slb service command to create/
enter a virtual SLB service context.
2
For a new virtual SLB service, use the id command to set the identification
number for the virtual SLB service (see virtual-server virtual-slb-service id on
page 327).
3
Use any of the remaining virtual-server virtual-slb-service
commands as required.
show virtual-slb-service
User level: user, privileged, supervisor
Use the show virtual-slb-service command to display virtual SLB services.
The syntax for this command is:
show virtual-slb-service [<server name> [<service name>]]
server name
service name
Example:
Router-N>
show virtual-slb-service details
User level: user, privileged, supervisor
Use the show virtual-slb-service details command to display the full
details of virtual SLB services.
The syntax for this command is:
show virtual-slb-service details [<server name> [<service
name>]]
server name
service name
324
The name of the virtual SLB server, a string up to 80
characters.
The name of the virtual SLB service, a string up to 32
characters.
show virtual-slb-service SrvrName
The name of the virtual SLB server, a string up to 80
characters.
The name of the virtual SLB service, a string up to 32
characters.
Avaya P330 Reference Guide