Show Port Redundancy; Show Port Security - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands

show port redundancy

User level: user, privileged, supervisor
Use the show port redundancy command to display information about the port
redundancy schemes defined for the switch. The "status" column displays which of
the two redundancy member ports is enabled currently.
The syntax for this command is:
show port redundancy
Example:
P330-N>show port redundancy
Redundancy Name
-----------------
gregory
reuven
meir
arie
Port Redundancy global state is enable
Minimum Time between Switchovers: 1
Switchback interval: 3

show port security

User level: user, privileged, supervisor
Use the show port security command to list the security mode of the ports of a
switch or stack. When no port number is specified, this command displays all the
secured ports in the stack.
Port security for the P330-ML switches will always have the value unknown.
This command is used to display the security status for the other P330 switches
in the stack.
The syntax for this command is:
show port security [<module>[/<port>]]
136
Primary Port
--------------
3/48
3/46
3/1
3/34
Secondary Port
----------------
3/47
3/45
3/2
3/33
Avaya P330 Reference Guide
Status
--------
secondary
secondary
primary
secondary