Example:
P330-1(super)# set dot1x quiet-period 90
Done!
set dot1x re-authperiod
User level: supervisor
Use the set dot1x re-authperiod command to set the idle time between re-
authentication attempts.
The syntax for this command is:
set dot1x re-authperiod <Seconds>
Seconds
Example:
P330-1(super)# set dot1x re-authperiod 90
Done!
set dot1x server-timeout
User level: supervisor
Use the set dot1x server-timeout command to set the server retransmission
timeout period for all ports. This is the maximum time that the port will wait for a
reply from the Authentication Server.
The syntax for this command is:
set dot1x server-timeout <Seconds>
Seconds
Example:
P330-1(super)# set dot1x server-timeout 90
set dot1x supp-timeout
User level: supervisor
Use the set dot1x supp-timeout command to set the maximum time that the
switch will wait for a reply from the Authenticated Station before the session is
terminated.
Avaya P330 Reference Guide
Number of seconds – 0 to 65535
Number of seconds – 0 to 65535
Chapter 2
Avaya P330 Layer 2 CLI Commands
47