show ppp authentication
User level: user, privileged, supervisor
Use the show ppp authentication command to display the authentication
method used for PPP sessions.
The syntax for this command is:
show ppp authentication
Example:
P330-N>show ppp authentication
PPP Authentication Parameters:
------------------------------
Incoming:
show ppp baud-rate
User level: user, privileged, supervisor
Use the show ppp baud-rate command to display the ppp baud-rate.
The syntax for this command is:
show ppp baud-rate
Example:
P330-N>show ppp baud-rate
PPP baud rate is 38400
Avaya P330 Reference Guide
Chapter 2
CHAP
Avaya P330 Layer 2 CLI Commands
141