Set Dot1X System-Auth-Control Disable; Set Dot1X System-Auth-Control Enable - Avaya P330 Reference Manual
Stackable switch
Hide thumbs
Also See for P330:
- User manual (89 pages) ,
- User manual (214 pages) ,
- User manual (281 pages)
Table of Contents
Advertisement
Chapter 2
Avaya P330 Layer 2 CLI Commands
The syntax for this command is:
set dot1x supp-timeout <Seconds>
Seconds
Example:
P330-1(super)# set dot1x supp-timeout 90
set dot1x system-auth-control disable
User level: supervisor
Use the set dot1x system-auth-control disable command to globally
disable the PBNAC (802.1x) feature.
The syntax for this command is:
set dot1x system-auth-control disable
Example:
P330-1(super)# set dot1x system-auth-control disable
dot1x system-auth-control disabled
set dot1x system-auth-control enable
User level: supervisor
Use the set dot1x system-auth-control enable command to globally
enable the PBNAC (802.1x) feature.
The syntax for this command is:
set dot1x system-auth-control enable
Examples:
•
When a RADIUS server is defined:
P330-1(super)# set dot1x system-auth-control enable
dot1x system-auth-control enabled
48
Number of seconds – 0 to 65535
Avaya P330 Reference Guide
Advertisement
Table of Contents
