Set Intelligent-Multicast Router-Port-Pruning Time; Set Interface Inband - Avaya P330 Reference Manual

The syntax for this command is:
set intelligent-multicast group-filtering-delay time <seconds>
seconds
Example:
P330-N# set intelligent-multicast group-filtering-delay time
40
Done!

set intelligent-multicast router-port-pruning time

User level: privileged, supervisor.
Use the set intelligent-multicast router-port-pruning time
command to set the aging time for router ports. This is a timer that ages out Router
port information if IGMP queries are not received within the configured time.
The syntax for this command is:
set intelligent-multicast router-port-pruning time <seconds>
seconds
Example:
P330-N# set intelligent-multicast router-port-pruning-time
40
Done!

set interface inband

User level: privileged, supervisor.
Use the set interface inband command to configure the Management inband
interface on the Master agent in the stack.
The syntax for this command is:
set interface inband <vlan> <ip_addr> <netmask>
vlan
ip_addr
netmask
Avaya P330 Reference Guide
Chapter 2
Group filtering time in seconds.
Router port pruning time in seconds.
The number of the VLAN to be assigned to the interface
IP address of the inband interface
Subnet mask
Avaya P330 Layer 2 CLI Commands
51