Ip Srrp Backup; Ip Vlan/Ip Vlan Name - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands

ip srrp backup

User level: privileged, supervisor.
Use the ip srrp backup command to backup an additional interface of the main
router using the SRRP application. If the main router fails, the switch takes over its
activities on all configured interfaces.
The syntax for this command is:
ip srrp backup <main router addr>
main router addr
Example:
Router-N(config-if:marketing)#ip srrp backup 192.168.50.11

ip vlan/ip vlan name

User level: privileged, supervisor.
Use the ip vlan and ip vlan name commands to specify the VLAN on which an
IP interface resides. You can specify either the VLAN ID using the ip vlan
command or the VLAN name using the ip vlan name command.
The no ip vlan or no ip vlan name command to reset the IP interface to the
default VLAN.
The syntax for this command is:
[no] ip vlan <vlan-id>
or
ip vlan name <vlan-Name>
Example:
To specify VLAN developmental as the VLAN used by interface "products":
Router-N(config-if:marketing)# ip vlan name development
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
248
IP address of the main router interface
Avaya P330 Reference Guide