Show Ip Traffic - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands

show ip traffic

User level: user, privileged, supervisor
This command does not apply to the P333R-LB.
Use the show ip traffic command to display the IP traffic statistics counters.
The syntax for this command is:
show ip traffic
Example:
Router-N> show ip traffic
IP statistics:
ICMP statistics:
--type q to quit or space key to continue--
218
Received:
1365359 total, 45659 local destination
0 bad hop count, 0 packet header errors
0 unknown protocol, 136786 address errors
1182914 discarded
Fragments:
0 reassembled, 0 timeouts
0 couldn't reassemble, 0 fragmented
Sent:
19442 generated, 0 forwarded
0 no route, 0 discarded
Received:
881 total, 3 ICMP errors
0 unreachables, 0 time exceeded
0 parameter, 0 quench
861 echo, 17 echo reply
0 timestamps request, 0 timestamp reply
0 mask requests, 0 mask replies
0 redirects
Avaya P330 Reference Guide