Ar-Filter-Admin-Status; Show Ar-Filter - Avaya P330 Reference Manual

Example:
Router-N(configure)#
Vsrvc1
Router-N(configure)#
0.0.0.128 3 uni-directional

ar-filter-admin-status

User level: privileged, supervisor
Use the ar-filter-admin-status command to enable or disable the
administrative status of an AR filter.
The syntax for this command is:
ar-filter-admin-status <id> <enable | disable>
id
enable
disable
Example:
Router-N(configure)#

show ar-filter

User level: user, privileged, supervisor
Use the show ar-filter command to display all AR filters.
The syntax for this command is:
show ar-filter [<id>]
id
Example:
Router-N>
Avaya P330 Reference Guide
ar-filter 1 10.1.1.1 0.0.0.128 any
ar-filter 2 host 10.1.1.1 10.2.2.2
The identification number of the AR filter, an integer from 1 to
1024.
Set administrative status of an AR filter to enable.
Set administrative status of an AR filter to disable.
ar-filter-admin-status 1 disable
The identification number of the AR filter, an integer from 1 to 1024.
show ar-filter 1
Chapter 4 Load Balancing CLI Commands
261