Chapter 4
Load Balancing CLI Commands
real-bridging-fw weight
User level: privileged, supervisor
Use the weight command to set a weight for the real bridging firewall. Use the
no form of this command to set the weight to the default value (10).
The syntax for this command is:
[no] weight <weight>
weight
Example:
Router-N(configure)# weight 5
show real-bridging-fw
User level: user, privileged, supervisor
Use the show real-bridging-fw command to display all real firewalls using
Bridging FWLB.
The syntax for this command is:
show real-bridging-fw [<server-ip>]
server-ip
Example:
Router-N(configure)# show real-bridging-fw 10.1.1.2
show real-bridging-fw details
User level: user, privileged, supervisor
Use the show real-bridging-fw details command to display the full
details of a real firewall using Bridging FWLB.
The syntax for this command is:
show real-bridging-fw details [<server-ip>]
server-ip
Example:
Router-N(configure)# show real-bridging-fw details
10.1.1.2
292
The weight of the real server, an integer from 1 to 256.
The IP address of the real server.
The IP address of the real server.
Avaya P330 Reference Guide