Show Trunk; Show Username - Avaya P330 Reference Manual

show trunk

User level: user, privileged, supervisor
Use the show trunk command to display VLAN tagging information for the
switch.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>-<port_num>]]
mod_num
(Optional)
port_num
(Optional)
Example:
P330-N>show trunk 4/1
Port
-----
41/1
41/2
Output Fields:
Field
Port
Mode
Binding mode
Native VLAN

show username

User level: supervisor
Use the show username command to display the local user accounts.
The syntax for this command is:
show username
Avaya P330 Reference Guide
Number of the switch. If you do not specify a number, all
switches in the stack are shown.
Number of the port on the switch. If you do not specify a
number, all ports on the specificity switch are shown.
You can specify a port range.
Mode Binding mode
----- --------------------
off statically bound
dot1q statically bound
Description
Switch and port number(s)
Tag status of the port (dot1q - dot1Q tagging mode,
off - clear mode).
Binding mode of the port
Number of the Port VLAN ID (the VLAN to which received
untagged traffic will be assigned).
Chapter 2 Avaya P330 Layer 2 CLI Commands
Native vlan
-----------
1
2
157