Example:
Router-N>
ServiceName
virtual-server virtual-slb-service
User level: privileged, supervisor
Use the virtual-server virtual-slb service command to create/enter a
virtual SLB service context. Use the no form of this command to delete a virtual
SLB service.
The syntax for this command is:
[no] virtual-server virtual-slb service <service name>
service name
Example:
Router-N(configure)#
virtual-server virtual-slb-service admin-status
User level: privileged, supervisor
Use the admin-status command to set the administrative status to enable or
disable.
The syntax for this command is:
admin-status <enable | disable>
enable
disable
Example:
Router-N(configure)#
Avaya P330 Reference Guide
show virtual-slb-service details SrvrName
The name of the virtual SLB service, a string of up to 32
characters.
virtual-slb service Srvc1
Set admin status to enable.
Set admin status to disable.
admin-status enable
Chapter 4
Load Balancing CLI Commands
325