Show Ip Access-List-Dscp; Show Ip Access-List-Summary - Avaya P330 Reference Manual

Chapter 3 Avaya P330 Layer 3 CLI Commands

show ip access-list-dscp

User level: user, privileged, supervisor
Use the show ip access-list-dscp command to display the DSCP to CoS map
of a policy-list.
The syntax for this command is:
show ip access-list-dscp <policy-list-number> [<dscp>]
policy-
list-
number
dscp
Example:
Router-N> show ip access-list-dscp 101
Trust configuration is trust-cos
DSCP
---- -------------------- ---------- ------------
0 fwd0
1 fwd0
2 fwd0
3 fwd0
4 fwd0
5 fwd0
6 fwd0
7 fwd0
8 fwd1
9 fwd1
10 fwd1
11 fwd1

show ip access-list-summary

User level: user, privileged, supervisor
This command applies to the P334T-ML only.
Use the show ip access-list-summary command to display a list of all
configured access lists.
The syntax for this command is:
show ip access-list-summary
208
A valid id number for a policy list currently defined for the module
(100 - 149, 0 - default list)
dscp entry (0 - 63)
Action Precedence Name
mandatory DSCP#0
mandatory DSCP#1
mandatory DSCP#2
mandatory DSCP#3
mandatory DSCP#4
mandatory DSCP#5
mandatory DSCP#6
mandatory DSCP#7
mandatory DSCP#8
mandatory DSCP#9
mandatory DSCP#10
mandatory DSCP#11
Avaya P330 Reference Guide