Ip Access-List-Owner; Ip Bootp-Dhcp Relay - Avaya P330 Reference Manual

ip access-list-owner

User level: privileged, supervisor.
Use the ip access-list owner command to set the owner for a specific policy
list.
The syntax for this command is:
ip access-list-owner <policy-list-number> <owner>
<policy-list-number>
<owner>
Example:
Router-N(configure)# ip access-list-owner 101 admin
Done!

ip bootp-dhcp relay

User level: privileged, supervisor.
If you are at the "privileged" level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
The ip bootp-dhcp command enables relaying of bootp and dhcp requests to the
bootp/dhcp server.
The no ip bootp-dhcp command disables bootp/dhcp relay.
The default state is disabled.
The syntax for this command is:
[no] ip bootp-dhcp relay
Example:
To enable relaying of BOOTP and DHCP requests:
Router-N(configure)# ip bootp-dhcp relay
Done!
Avaya P330 Reference Guide
Chapter 3 Avaya P330 Layer 3 CLI Commands
integer (100 - 149)
list owner
181