Set Port Static-Vlan - Avaya P330 Reference Manual

Chapter 2 Avaya P330 Layer 2 CLI Commands
The syntax for this command is:
set port speed <mod_num>/<port_num> <10MB|100MB|1GB>
mod_num
port_num
Example:
To configure port 1 on module 4 to 100 Mbps
P330-N# set port speed 4/1 100MB
Port 4/1 speed set to 100 Mbps.

set port static-vlan

User level: privileged, supervisor.
Use the set port static-vlan command to assign static VLANs to ports.
The syntax for this command is:
set port static-vlan [module/port range] [vlan num]
module/port
range
vlan num
Example:
P330-N# set port static-vlan 3/4-6 2
VLAN 2 is bound to port 3/4
VLAN 2 is bound to port 3/5
VLAN 2 is bound to port 3/6
78
Number of the switch.
Number of the port on the switch.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
Port range
vlan to bind to port
Avaya P330 Reference Guide