Real-Bridging-Fw Backup; Real-Bridging-Fw Hc Failure-Retries; Real-Bridging-Fw Hc Interval - Avaya P330 Reference Manual

Chapter 4 Load Balancing CLI Commands

real-bridging-fw backup

User level: privileged, supervisor
Use the backup command to set a backup real bridging firewall. Use the no form
of this command to remove a backup real bridging firewall.
The syntax for this command is:
[no] backup <r-bridging-fw-ip>
r-bridging-fw-ip
Example:
Router-N(configure)# backup 10.1.1.2

real-bridging-fw hc failure-retries

User level: privileged, supervisor
Use the hc failure-retries command to set the number of times the real
bridging firewall should be health-checked before determining failure. Use the no
form of this command to return the failure-retries to the default value (4).
The syntax for this command is:
[no] hc failure-retries <failure-retries>
failure-retries
Example:
Router-N(configure)# hc failure-retries 10

real-bridging-fw hc interval

User level: privileged, supervisor
Use the hc interval command to set the interval between health-checks. Use
the no form of this command to return the interval between health-checks to the
default (5 seconds).
The syntax for this command is:
[no] hc interval <time-sec>
time-sec
290
The IP address of the backup real bridging firewall.
The number of times, an integer from 1 to 32.
The amount of time in seconds, an integer from 1 to 36.
Avaya P330 Reference Guide