Set Port Vlan-Binding-Mode Command; Set Port Static-Vlan Command - Avaya P333T User Manual

Set port vlan-binding-mode Command

Use the set port vlan-binding-mode command to define the binding method used
by ports.
The syntax for this command is:
set port vlan-binding-mode [port_list] [value]
port list
value
Example:
Cajun_P330-N# set port vlan-binding-mode 1/5-15 static
Set Port vlan binding method:1/5
Set Port vlan binding method:1/6
.
.

Set port static-vlan Command

Use the set port static-vlan command to statically assign VLANs to ports.
The syntax for this command is:
set port static-vlan [module/port range] [vlan num]
[module/port] - port range
{vlan range] - vlan to bind to port
Example:
Cajun_P330-N# set port static-vlan 1/4-6 9
Avaya P333T User's Guide
module and ports to bundle (format: module/port)
static - the port supports only the VLAN as configured per port
bind-to-configured - the port supports the VLANs configured
on the device
bind-to-all - the port support the whole range of VLANs on the
device
Chapter 6 Cajun Campus CLI – Layer 2
89