Copying The Running Configuration To The Startup Configu- Ration Using The Cli; Copying Files; Copy Files Using The Web Agent; System Reset Dialog Box - Avaya Cajun P550R User Manual

Copying the
Running
Configuration
to the Startup
Configuration
Using the CLI

Copying Files

Copy Files Using
the Web Agent
Cajun P550/P880/P882 Switch User Guide
Initialize and Setup of the P550/P880/P882 Switch
Figure 2-17. System Reset Dialog Box
2. Click Save. The running configuration is saved as the startup
configuration.
* Note: You can also save the running configuration to the
startup configuration through the Configuration File
Management dialog box. Refer to the "Copying Files"
section for that procedure.
To save your running configuration as your startup configuration in
NVRAM using the CLI, enter the following command in Priv mode:
> # copy running-config startup-config
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
You can copy files to and from multiple locations. For example, if
you modify the running configuration and you want to reinstate
your startup configuration parameters, you can copy your startup
configuration to your running configuration in volatile RAM. You
can also upload or download configuration files by copying files
from a TFTP server directory to the switch or to a startup or running
configuration file. You can copy files using either the web agent or
the CLI.
To copy files using the web agent:
1. Select File Management from the System > Configuration >
Configuration Files group on the web agent window. The
Configuration File Management dialog box opens (Figure 2-
18).
2-27