Protecting Memory Card Files (For 8692 Sf/Cpu Only) - Avaya 8800 Installation Manual

Procedure steps
1. Press the eject button above the memory card receptacle on the 8692 SF/CPU
2. Pull the flash memory card out of the card receptacle.

Protecting memory card files (for 8692 SF/CPU only)

Avaya ships each 8692 SF/CPU PCMCIA memory card with the read-write protect switch in
the unprotected position. After you successfully load the configuration file and save your
configuration, you can write-protect the memory card for backup purposes.
The 8895 SF/CPU compact flash card is not equipped with a read-write protect switch.
Typically, you do not operate an Avaya Ethernet Routing Switch 8800/8600 with a write-
protected memory card. Make a copy of your configuration on another memory card, write-
protect the second card, and store it in a safe place. If you do not use a second memory card,
you can copy your configuration to a File Transfer Protocol (FTP) or Trivial FTP (TFTP)
server.
Procedure steps
1. To remove the card, press the eject button next to the memory card receptacle.
2. Pull the card out of the card receptacle.
Installation — Chassis
module or the 8895 SF/CPU module .
The card pops out slightly.
For information about removing a card, see
card: 8010, 8006, 8003-R chassis
Figure 44: Removing a flash memory card: 8010, 8006, 8003-R chassis
Protecting memory card files (for 8692 SF/CPU only)
Figure 44: Removing a flash memory
on page 77.
November 2012 77