Stacker Paddle Drive Clutch Assy - Konica Minolta bizhub 500 Service Manual

3. OTHER
3.3.13

Stacker Paddle Drive Clutch Assy

[1]
[2]
[1]
[5]
[7]
[6]
16
4349f2c026na
[3]
4349f2c027na
[3]
[2]
[4]
4349f2c028na
Confidential – for internal use only, do not distribute
Field Service Ver.1.0 Feb. 2006
A. Removal Procedure
1. Remove the Lift Tray.
(See P.13)
2. Remove the Conveyance Unit.
(See P.13)
3. Remove the Conveyance Upper Cover.
(See P.9)
4. Remove the E-ring [1].
5. Loosen two hexagonal socket head
screws [2], and remove the Stacker
Paddle Drive Clutch Assy [3].
B. Reinstallation Procedure
1. Check that the 2-mm hole [2] of the
stacker paddle drive shaft [1] and the
cutout of the frame [3] are aligned and
install the Stacker Paddle Drive Clutch
Assy [4].
2. Refer to the figure and check the paddle
position [5].
3. Hook the Solenoid Flapper [7] to the
claw [6] of the Stacker Paddle Drive
Clutch Assy [4].
4. Attach the E-ring and reinstall the
Stacker Paddle Drive Clutch Assy.
5. Adjust the spacing between the E-ring
and the Stacker Paddle Drive Clutch
Assy to 0.2 mm and tighten two hexago-
nal socket head screws.