Maintenance Procedure (Periodical Check Parts); Replacing The Tray 2 Feed Roller - Konica Minolta magicolor 4690MF Service Manual

3. Periodical check
3.4

Maintenance Procedure (periodical check parts)

3.4.1

Replacing the tray 2 feed roller

A. Periodically replaced parts/cycle
• Tray 2 feed roller: Every 300,000 prints
B. Procedure
1. Slide out the tray 2.
[2]
[1]
[1]
8
[3] [2]
A0FDF2C001DA
[2]
A0FDF2C002DA
[1]
A011F2C501DA
Field Service Ver. 1.0 May 2008
2. Lock the media lift plate [1].
3. Remove two C-rings [2], and remove
the bearing [3] at the front.
4. Remove the C-ring [1], and remove
the feed roller [2].
NOTE
• When reinstalling the feed roller [1],
make sure that it is mounted in the
direction shown in the illustration
on the left.