License Management - Get Request Code; License Management - Initialize; License Management - Activation - Konica Minolta BIZHUB C3100P Service Manual

(c) Setting item
• Mode 1: 1 count per 1 copy cycle
• Mode 2: Large size is double counts
(d) Count-up table
Print mode
Size
Mode
Type
Total
Size
2-sided Total
• 0: No count
• 1: 1 count
• 2: 2 counts
• 3: 3 counts
• 4: 4 counts

4.3.2 License Management - Get Request Code

• When the license management error is occurred, it will not be displayed until the repair code is input.
(1) Functions
• To display or print request code and serial number.
(2) Use
• To check the request code and serial number.

4.3.3 License Management - Initialize

(1) Functions
• To initialize license management information.
(2) Use
• To be used when license management information cannot be repaired.
• License management information should be initialized when the machine fails to generate request code or repair request code due to any
trouble and the information cannot be repaired.
(3) Procedure
NOTE
• You need to access License Management System (LMS) to implement each function setting.
• When license management information cannot be repaired, initialize the information with the following procedure.
1. Contact the license management section of sales company to report the information necessary to issue the initialize code.
2. The license management section of sales company supplies the initialize code.
3. Call the Billing Setting to the screen.
4. Select [LICENSE MGMT] -> [INITIALIZE].
5. Enter the initialization code issued by the call center by using the up key/down key, and press the Menu/Select key.
6. Select [EXCUTE] and press the Menu/Select key.
7. After completing the initialization, turn OFF and ON the main power switch.

4.3.4 License Management - Activation

(1) Functions
• To activate i-Option functions.
(2) Use
• To activate i-Option functions with CE.
• The functions can be activated by selecting the desired function and enter the appropriate license code and function code.
• Administrators also can carry out the procedure No.14 or later step to activate i-Option functions through Administrator Settings.
(3) Procedure
NOTE
• You need to access License Management System (LMS) to implement each function setting.
• Before accessing the LMS, CE are required to register the E-mail address and the password in the LMS. To register, click [CE
Initial Registration] that is located in the upper right of CE Login screen.
1. Prepare "token certification."
2. Access the following URL using the PC connected to the Internet.
https://lms.konicaminolta.com/license/KM/support.aspx
3. Click [CE Login].
1-Sided
Sizes other than Specified sizes
those specified
Mode Mode
1 2 1
1 1 1
0 0 1
0 0 0
I-25
I ADJUSTMENT/SETTING > 4. SECURITY SERVICE
2-Sided
Sizes other than
those specified
Mode
2 1 2
2 2 2
1 0 0
0 1 1
Specified sizes
Mode
1 2
2 4
2 2
1 1