License Plate Light (Sedan); License Plate Light (Station Wagon); Dome Light - Subaru Legacy Outback 2006 Owner's Manual

11-62
Maintenance and service
and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise. Install the light cover on the
rear gate.

License plate light (Sedan)

It may be difficult to replace the bulbs. We
recommend that you have your SUBARU
dealer replace the bulbs if necessary.
License plate light (Station
wagon)
700075
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the lens and cover.
0
5. Tighten the mounting screws.

Dome light

700076
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
700077
700083