Backup Light; License Plate Light - Subaru Crosstrek Hybrid 2022 Owner's Manual

458
Replacing bulbs
& Backup light
1. Apply a flat-head screwdriver to the
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.
2. For left side light, turn the bulb socket
clockwise and remove it.
For right side light, turn the bulb socket
counterclockwise and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. For left side light, turn the bulb socket
counterclockwise and install it.
For right side light, turn the bulb socket
clockwise and install it.
5. Install the light cover on the rear gate.
& License plate light
1. The license plate lights must be
pushed outwards, and then pulled out to
be removed.