NEC Univerge SV8100 Features And Specifications Manual page 65

UNIVERGE SV8100
System Information
slot location
17 3-1
18 3-2
19 3-3
20 3-4
21 3-5
22 3-6
23 3-7
24 3-8
Conditions
Alarm Reports and System Information Reports can be output to a USB stick on the

CD-CP00-US.
The UNIVERGE SV8100 supports the following Alarms to be output to the LCD of a

multiline terminal:
SMDR Buffer Full

CD-CP00-US-LAN link Error

The UNIVERGE SV8100 does not support printouts of the following Alarms:

Power Failure

RAM Backup Battery Error

Networking Keep Alive Error

IP Duplication Alarm

Up to 12 System Alarm times can be scheduled to print on a Monthly, Daily, and Hourly time

frame. The report indicates both Major and Minor Alarms.
System Information Reports cannot be set to output at a scheduled time.

When using the email functionality of reports, the email address in Program 90-11-10 (From

Address) must be set for the email feature to work.
After a new alarm is output, it cannot be output a second time. New alarms must be

generated before Program 90-12-04 can be performed a second time.
Alarm Reports
Table 2-5 Sample System Information Printout (Continued)
type assign port
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
none Not Install
05/18/2006 11:02
condition
Issue 11.0
note
2 - 33