System Availability - NEC Univerge SV8100 Features And Specifications Manual

Issue 11.0

System Availability

Terminals
All Terminals
Required Component(s)
VRS for Forced Account Codes for Single Line Telephones
Related Features
Automatic Route Selection
PBX Compatibility
Speed Dial – System/Group/Station
Station Message Detail Recording
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-11 Basic Trunk Data Setup –
Account Code Required
2 - 14
Description/Comments
Enable/Disable Account Codes for
each trunk.
Account Code – Forced/Verified/Unverified
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
Level
2 3
